Use this string of 3 Lunar Simulator LED in combination with your Lunar Simulation Module to your Apex Unit...
447 uS/cm Conductivity Calibration Solution use to calibrate your Conductivity Probe and PM2 for RO/DI water quality monitoring.
Use this string of 5 Lunar Simulator LED in combination with your Lunar Simulation Module to your Apex...
Dhs. 25.00
53 mS/cm Conductivity Calibration Solution use to calibrate your Conductivity Probe and PM2 for salinity monitoring.
Advanced Dimming Cable use to connect Aqua Illuminations Sol and Acan Lighting LEDs to the VDM Module. This is...
The wired Apex Display module (ADM) allows you to always have visual access and control of your Apex...
This 24VDC Apex Power Supply 36W  is used with the FMM so that you can attach the powered...
Aqua Controller Apex/Jr Temperature Probe monitor vital water parameters to maintain ideal aquarium water quality.  Temperature Probe Setup...
Aquabus 15′ Cable is a fifteen foot Male/Male Aquabus cable that connects one module to another and intended...
Aquabus 15′ Extension Cable are great for extending your current Aquabus Cable if you need a little more...
Aquabus 6′ Cable is a Male/Male Aquabus cable that connects one module to another. This cable allows you...
Replacement Tubing for the Neptune DOS Dosing and Fluid Metering System If you need longer tubing for your...
Flow Sensor FS-25 - 1/4″ for the Fluid Metering Module from Neptune and usually used with a return pump,...
FS-50 Flow Sensor - 1/2″ can be placed in line with the flow on any pipe, connected to the...
FS-200 Flow Sensor - 2" will work with flow rates from 300-3000 gph, and will connect to any standard...
FS100 Flow Sensor - 1″ is used with a return pump, this flow sensor can be placed in line...
Lab Grade Conductivity / Salinity Probe provides accurate water parameter measurement essential for maintaining a marine aquarium.  Start measuring...
Lab Grade ORP Probe is a quality probes for Neptune Systems AquaController Apex systems and tend to last longer,...
Lab Grade pH Probes tend to last longer, give more accurate results, stay calibrated longer, and need replaced less...
Leak Detection Probe for solid surface used in combination with the ALD (Advanced Leak Detection) module and keeps the detection surfaces solidly...
Low-Profile Leak Detection Probe LD1 is designed to be placed underneath your carpet, stand or any other device but...
Magnetic Probe Rack - MPR designed specifically for the Apex and it will hold the larger diameter temperature...
  Optical Level Sensor plugs directly into the FMM allowing you to monitor the level of your sump, mixing...
pH Probe Double Junction letting you go longer between calibrations, and having to purchase and replace probes less...
Practical Multi-Purpose Utility Pump - PMUP is a 24VDC submersible pump that can be used for many different tasks on...
Stand (Orange) For PMUP and Optical sensor designed to hold the PMUP upright, notify you if your ATO...
Standard Grade ORP Probe - PRBORPS are accurate and long-lasting, and designed specifically for Neptune Systems Apex Controllers. ...
Standard Grade PH Probes tend to last longer, give more accurate results, stay calibrated longer, need replaced less frequently....
Stream Cable - SURFCAB2 is three foot cable connects to the variable outputs built into the Apex, Apex Classic,...
SV-1 Solenoid Valve is 24VDC powered, normally-closed (NC) has push-fit tubing input and outputs designed for standard 1/4″ tubing...
Two Channel Dimming Cable - DIMCAB2 is a six foot cable that has an RJ45 connector on one...
Dhs. 148.00
Dhs. 25.00
Dhs. 215.00
Dhs. 25.00
Dhs. 100.00
Dhs. 450.00
Dhs. 115.00
Dhs. 110.00
Dhs. 110.00
Dhs. 80.00
Dhs. 110.00
Dhs. 160.00
Dhs. 180.00
Dhs. 425.00
Dhs. 250.00
Dhs. 660.00
Dhs. 456.19
Dhs. 250.00
Dhs. 115.00
Dhs. 215.00
Dhs. 199.00
Dhs. 421.00
Dhs. 255.00
Dhs. 142.86
Dhs. 250.00
Dhs. 165.00
Dhs. 110.00
Dhs. 200.00
Dhs. 80.00
Spinner