Deltec - Complete System UV Sterilisers

Dhs. 856.00

Available Options

Deltec - Complete System UV Sterilisers

The Deltec Complete System UV Steriliser designed to produce a radiation intensity of 33,000 microwatt's/sec/sq.cm which is sufficient to destroy most common pathogens in fresh and salt water aquariums however if required the intensity can be increased by decreasing the flow rate through the unit. 

The use of type C ultraviolet radiation (UV-C) is the most effective way to sterilise water. No chemicals are involved and there is no risk of dangerous overdosing. Long process times are not required as sterilisation is instantaneous.

The highly concentrated UV-C. energy exerts a lethal effect on living organisms. It alters the genetic material (DNA) and inhibits their reproduction capability. The germicidal properties of UV-C radiation are therefore extremely beneficial in destroying bacteria, viruses, protozoa, algae, yeasts and mould spores.

Different types or pathogens or bacteria require different levels of radiation to either kill or to stop them from functioning and multiplying.

  • Product Code RUW201 - 10 W UV, equivalent to a conventional 20W UV
  • Product Code RUW202 20 W UV, equivalent to a conventional 40W UV
  • Product Code RUW203 39 W UV, equivalent to a conventional 80W UV
  • Product Code RUW206 - 80 W UV, equivalent to a conventional 160W UV

The Deltec Complete System UV Steriliser features a pure quartz bulb as well as a quartz sleeve so 98% of the UV-C produced is utilised. In effect the Deltec Complete System UV Steriliser models produce approximately twice as much UV-C per watt than a conventional unit with a glass bulb. This makes the units much more compact and easier to fit into many aquarium cabinets.

Features: 
  • Slimline high intensity quartz bulb with ceramic cap for good thermal insulation.
  • Lamp life of 9000 hours for continuous use.
  • Electronic Ballast for flicker free operation, doubling the bulb life.
  • Pure quartz sleeve prevents thermal shocks and maintains the lamp at the correct temperature for maximum UV-C output regardless of the water temperature.
  • Reinforced UV resistant plastic body prevents degradation with time.
  • Single ended design and waterproof insulation to CE IP67.
  • Ballast and Lamp function LED indicator.
  • Allows partial submersion of the body in a sump thus reducing the space required for installation.
  • Viton gasket for a long term UV resistant seal. 
  • Can be easily connected together to form banks of UV units using standard pipework

Specifications:

10W Model

  • Wattage: 10 watts
  • Flow Rate: 500 lts/hr
  • Dimensions: 300mm x 100mm x 140mm 
  • Hose size: 9mm ID-12 mm OD

20W Model

  • Wattage: 20 watts
  • Flow Rate: 1000 lts/hr
  • Dimensions: 600mm x 100mm x 140mm 
  • Hose size : 12mm ID-16mm OD 

39W Model

  • Wattage: 39 watts
  • Flow Rate: 2000 lts/hr
  • Dimensions: 920mm x 100mm x 140mm 
  • Hose size : 16 mm ID /22mm OD

80W Model

  • Wattage: 80 watts
  • Flow rate: 4000 lts/hr
  • Dimensions: 920mm x 100mm x 140mm 
  • Hose Size : 16mm ID 22mm OD

    Suitability:

    10W Model

    • Reef System - (1-2 times turnover per hour) - 250 to 500 litres.
    • Fish System - (2-4 times turnover per hour) - 125 to 250 litres. 

    20W Model

    • Reef System - (1-2 times turnover per hour) - 500 to 1000 litres.
    • Fish System - (2-4 times turnover per hour) - 250 to 500 litres. 

    39W Model

    • Reef System - (1-2 times turnover per hour) - 1000 to 2000 litres.
    • Fish System - (2-4 times turnover per hour) - 500 to 1000 litres. 

    80W Model

    • Reef System - (1-2 times turnover per hour) - 2000 to 4000 litres.
    • Fish System - (2-4 times turnover per hour) - 1000 to 2000 litres.